Start here
What do you need today?
I need a price
Send the diameter and quantity. Written pricing, packing and lead time — usually within one working day.
Get a quote 02I need technical data
Datasheet, standards alignment and batch test data for your structural engineer or consultant.
Request datasheet 03I am comparing with steel
Weight, lifecycle and durability side by side — then estimate your own order in the calculator.
Compare with steelGFRP vs steel / TMT
Steel rusts. GFRP doesn't.
Rust swells the bar, cracks the concrete and shortens the life of the structure. Remove the steel and the problem goes with it.
- Never rusts — 100+ year design life
- Up to ~2× the tensile strength
- About ¼ the weight, non-conductive
- Corrodes in moisture, salt and chemicals
- Heavy, magnetic and conductive
- Repairs and spalling over its life
| Property | TMT steel | GFRP — Five Fingers |
|---|---|---|
| Corrosion resistance | Corrodes | Does not corrode |
| Weight (density) | ~7.85 ton/m³ | ~¼ the weight of steel |
| Ultimate tensile strength | ~500–600 MPa | Up to ~2× stronger |
| Design service life | ~50 years | 100+ years |
| Electrical conductivity | Conductive | Non-conductive |
GFRP rebar · made in India
Future of construction with GFRP rebar
Manufactured by pultrusion in Nana Borsara, Surat, Gujarat — and supplied to project sites across India.
-
Cost efficient
A quarter of the weight to buy by the metre, transport and handle — and no corrosion repairs over the life of the structure.
-
Corrosion resistant
Unlike steel, GFRP does not rust when exposed to water, salt or air. Concrete stays free of corrosion cracks.
-
Non-conductive
Does not conduct electricity, and conducts far less heat than steel — safer near electrical plant and people.
-
Lightweight
About ¼ the weight of a steel bar of the same diameter. Lower transport cost and easier labour handling.
-
Higher tensile strength
Up to about twice the tensile strength of steel rebar, bar for bar.
-
Eco friendly
A 100+ year design life with no repair cycles means less material, energy and rebuilding over time.
The range
Every size from 3 to 25 mm
Pick your diameter to get its price. 3–10 mm are cut to custom lengths; 12–25 mm are supplied up to 12 m.
Guaranteed tensile values and unit weights are issued on the product datasheet against confirmed QC data.
Where it is used
One material, six sectors
Anywhere corrosion, chemicals, moisture or electromagnetic interference makes steel a liability.
Buildings & High-Rise
Homes, commercial and tall structures
Explore
Infrastructure
Bridges, metro, highways, tunnels
Explore
Marine & Coastal
Salt-water and chloride exposure
Explore
Water & Wastewater
Treatment plants and tanks
Explore
Industrial & Chemical
Plants where steel corrodes
Explore
Solar & Power
Foundations and power infrastructure
Explore
Why the material wins
Ten reasons engineers switch from steel
Rust Free
Never rusts, even in the harshest exposure.
Corrosion Resistant
Immune to chlorides, salts and chemicals.
High Tensile Strength
Up to ~2× the tensile strength of steel.
Lightweight
About a quarter the weight of steel.
Longer Service Life
Designed for a 100+ year service life.
Chemical Resistant
Ideal for plants and treatment works.
Non-Magnetic
Perfect for MRI rooms and rail.
Non-Conductive
No electrical or EMI interference.
Waterproof
Performs where steel corrodes.
Low Maintenance
No corrosion repairs over the life.
Rebar calculator
How much lighter is your order?
Enter diameter, length and quantity — see total metres, GFRP weight and the weight you save over steel.
How ordering works
From enquiry to dispatch
Four steps. No long forms, no waiting for a call-back that never comes.
-
Send the specification
Diameter, quantity and destination. That is enough for us to quote.
-
Get a written quote
Price, packing and lead time in writing, usually within one working day.
-
Manufacturing & QC
Produced by pultrusion with dimensional and mechanical checks on every batch.
-
Dispatch
Bundled, labelled and delivered across India with documentation.
Supplied to
Trusted by builders and infrastructure firms
- Zealand Port & TerminalInfrastructure
- Pahal SolarSolar Energy
- Raviraj RCC PipesConstruction Material
- Venudhara ResidencyResidential
- Jay Khodiyar ConstructionConstruction
- Aadhya RealityReal Estate
- Sahjanand BuildtechBuildtech
- P P Savani GroupDevelopment
- Agniveda EnergiesEnergy
- Shubh InfraInfrastructure
- M J Infra Project LLPInfrastructure
Areas we serve
Made in Surat, supplied across Gujarat
Our plant at Nana Borsara sits on the Surat–Ankleshwar belt — close to Gujarat's busiest industrial, coastal and city markets, with dispatch across India.
Before you enquire
Straight answers to the usual doubts
01 Isn't GFRP more expensive than steel?
Per kg it can cost more, but GFRP is about a quarter of the weight, so compare price per running metre against your steel specification, not per kg. Add the corrosion repairs and early replacement that steel brings in aggressive exposure and the lifecycle cost usually favours GFRP. Send your steel bar schedule and we will quote the GFRP equivalent per metre.
02 Is GFRP really as strong as steel?
In tension, yes — GFRP typically has up to about twice the tensile strength of steel. It has a lower modulus of elasticity and behaves elastically to failure, so design and detailing differ from steel. Our technical team supports your engineer with sizing for each application.
03 Will my structural engineer accept it?
Our GFRP rebars are designed and manufactured to align with ASTM D7957, IRC 112 and ISO 10406-1 benchmarks for glass-fibre reinforcement. We issue a datasheet and test data against the batch supplied, so your engineer can check it against the design.
04 Can GFRP be bent, cut or welded on site?
It can be cut on site with an abrasive or diamond blade, but it cannot be bent on site or welded like steel. If your design needs bent bars, share the bar-bending schedule with your enquiry and we will confirm what we can supply.
05 How does GFRP behave in a fire?
Like all fibre-reinforced polymers, the resin softens at high temperature, so fire performance depends on adequate concrete cover as set out in the design code. Your engineer specifies the cover; we provide the material data they need.
06 What sizes and lengths are available?
The full diameter range runs from 3 mm to 25 mm. Unlike the fixed-length steel bar, GFRP can be supplied in custom lengths — fewer laps and less wastage on site.
07 Do you deliver outside Gujarat?
Yes. We manufacture in Nana Borsara, Surat, Gujarat and supply project sites across India. Share the delivery location with your enquiry and the quote will include dispatch.
08 How fast do I get a quote?
Send the diameters, quantity and site location through the form or WhatsApp. We reply with pricing, packing and lead time, usually within one working day.